Model AN-OADM-PH

Features:

• -40 to +85 Degrees Celsius
• Operating Temperature
• Complete point-to-point network with
• just 2 AN-OADM-PHs
• Protocol and rate independent
• Passive Operation
• IP68 rated watertight enclosure
• Pole Mountable

Download and view the AN-OADM-PH Data Sheet (PDF)

Optical ADM for exterior use

The AN-OADM-PH is an Optical Add/Drop Multiplexer in a watertight (IP68) enclosure supporting from 4 to 32 C/DWDM ports. Its operating temperature range is from -40degrees Celsius to +85 degrees Celsius.

The AN-OADM-PH allows you to set up and configure a CWDM or DWDM network in a matter of minutes. It utilizes passive optical interfaces allowing for “on the go” expansion and re-configuration. Its protocol and rate independent architecture enables service providers to natively support any protocol including SONET, SDH, Ethernet, ATM and TDM traffic at any rate up to 10 Gb/s and beyond.

The AN-OADM-PH Enclosure is a member of Avvio Networks' family of intelligent optical networking products. For a list of orderable modules, contact your local Avvio Networks representative or use our contact form.

AN-OADM-PH Technical Specifications

C/DWDM Interface
Channel Spacing    20nm, 100 Ghz
Channel Passband    0.11nm (100Ghz)

Loss   
Com to Add or Drop    < 3.2dB
Com to Exp    < 1.8dB
Return Loss    > 45dB

DeMux Isolation   
Adjacent channel    > 28dB
Non-Adjacent    > 40dB

Mux Isolation   
Adjacent channel    > 28dB
Non-Adjacent    > 40dB

Channel Uniformity    < 0.5dB
Polarization Dependant Loss     < 0.15dB
Polarization Mode Dispersion    <0.1ps (DG)

Note: These are general specifications, consult with Avvio Networks for product-specific specifications

Fiber    
Fiber Type    SMF-28e with 900um Tight Buffer
Connector    SC/UPC

Environmental   
Operating Temp    -40 to +85 degrees Celsius
Ingress Protection    IP68

Dimensions   
Enclosure size    ~18.5” X 8.27” (470mm X 210mm)
Mounting    Pole/wall mount

Ordering information

AN-OADM-PH-XX-YY-ZZ
XX = Wavelength Spacing:
     10 = 100GHz
     20 = 20NM (CWDM)
YY = Channel Count ( 4 to 32 DWDM, 4 or 8 CWDM*)
ZZ = Enclosure size:
     01 = ~18.5” X 8.27” (470mm X 210mm)
     Pole/wall mount dome

*Contact Avvio Networks for other channel count options

For more information, please use our contact form or send an email to This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

You may also call us at (888) 54-AVVIO.